---
title: What is AQI (Air Quality Index) and how is it calculated?
slug: what-is-aqi-air-quality-index-and-how-is-it-calculated-what-is-aqi-air-quality-index-and-how-is-it-calculated
createdAt: 2024-12-06T00:18:06.218Z
---

AQI indicates Wi-Fi health within an AP's cell, as indicated by a scale from 0 (unusable) to 100 (perfect). Airtime utilization shows how much of the access point airtime is used by the clients that are associated with it.  

There could be many reasons why the AQI is impacted.  Some reasons are high utilization of the AP channel, clients using a slow data rate, co-channel or adjacent channel interference, or nearby non-802.11 Wi-Fi devices like Bluetooth devices, wireless video cameras, or outdoor microwave links. The AP itself has a channel switching mechanism to move out of the operating channel if the noise in the channel is high.

If you receive an AQI alert, you can check what is causing the AQI to be poor. Is it noise, OBSS load, or non-Wi-Fi interference? You can't do much for bursty noise and non-Wi-Fi interference. Since the 2.4 GHz band generally has more interference and congestion, using the 5 GHz band can help clients avoid interference, and this improves the overall performance of the network. 

Nile uses the following parameters to calculate the AQI: self-chan-util, noise-floor, channel-load, obss-chan-util, total-rx-chan-util, total-chan-free, total-tx-chan-util, and total-non-wifi-util. Definitions of these parameters are at the bottom of the article.

**Example of Bad AQI**

As you can see in the screenshot below, the AQI drops to 0, which is below the threshold value of 35, and this generates alerts on the Nile Portal saying AQI is impacted for 2 mins /3 mins

![Bad AQI](https://api.archbee.com/api/optimize/6swSwg1BT-BlfEPtYJhxM/eIN-B3u64PjjGRkfWxTPa-20261117-163457.png "Bad AQI")

**Example of Good AQI&#x20;**

Here, as you see, the AQI is above 35 and is marked as 98, which indicates that the air quality is good and that no issues are ongoing with the APs

Nile Portal: AQI Statistics

![ AQI Statistics](https://api.archbee.com/api/optimize/6swSwg1BT-BlfEPtYJhxM/cGivY6If4paxC-HSRBX__-20261117-163457.png " AQI Statistics")

**How to check the AQI alerts from the Nile Portal in detail:**

1. Click the Air quality tile under Infrastructure. Select the building in red.

![Air Quality Status ](https://api.archbee.com/api/optimize/6swSwg1BT-BlfEPtYJhxM/AG1gnQvuSirYVHKLeIk7R-20261117-163457.png "Air Quality Status ")

2\. This lists all the air quality-related events on the bottom right of the page 

![AQI events](https://api.archbee.com/api/optimize/6swSwg1BT-BlfEPtYJhxM/o5JzuOj0b8GVdSLN4bOjd-20261117-163457.png "Nile Portal ")

3\. Check the detailed view of the AQI for the time and location.

![Detail view of AQI ](https://api.archbee.com/api/optimize/6swSwg1BT-BlfEPtYJhxM/rhxPkbyQXQ4BrvQWyux8t-20261117-163457.png "Detail view of AQI ")

4. Select the time slot 

![AQI measuring time Slot](https://api.archbee.com/api/optimize/6swSwg1BT-BlfEPtYJhxM/qkhv6ATO2H0aWRpm-IDUt-20261117-163457.png "AQI measuring time Slot")

5\. Click the red circle on the map that indicates the AP that generated the bad AQI.

![measuring BAD AQI causing AP ](https://api.archbee.com/api/optimize/6swSwg1BT-BlfEPtYJhxM/xOu8EvXtDWAEyTjPtnr3X-20261117-163457.png "Nile Portal")

6\. You should see the threshold and AQI values for the time frame.

![](https://api.archbee.com/api/optimize/6swSwg1BT-BlfEPtYJhxM/VfL-ukLSu9t6uIse8P7Nr-20261117-163457.png "Nile Portal")

**Definitions of AQI calculation parameters&#xA0;**

- Self-chan-util:  Self-channel-util is the sum of total-tx-chan-util and total-rx-chan-util. 
- Noise-floor: The Noise Floor is the signal created from adding up all the unwanted signals within a measurement system.
- channel-load: The percentage of the channel usage in time.
- obss-chan-util: obss-chan-util reflects the co-channel Wi-Fi interference seen in the current channel. 
- total-rx-chan-util: Rx utilization is the percent of radio channel utilization in RX, receive traffic from the client.
- total-chan-free: Percentage of radio channels that are free for transmission.
- total-tx-chan-util: tx channel utilization is the percent of radio channel utilization in Tx, traffic sent from the AP.
- total-non-wifi-util: Total-non-wifi-util reflects the non-Wi-Fi channel utilization seen in the channel, which is the sum of non-Wi-Fi interference and adjacent channel interference seen in the current channel
